After all the modifications I did to FC, OSD, PDB it was time to do a test flight.
sadly I do not have a complete drone frame available at the moment. So I grabbed some parts from other frames and drones lying around and build something that should be able fly.
Current setup for this maiden testflight: 1806 2300kv motor with 4 inch props on 3cell. This should produce just enough lift to hover.
And yes the Oversky MUL-A is flying. It needs to be tuned, but I'm not going to spend time on tuning this setup as this is just a test setup. Now I have to make or buy a suitable frame for this flightcontroller.
No comments:
Post a Comment