Showing posts with label glass. Show all posts
Showing posts with label glass. Show all posts

Wednesday, October 12, 2016

Dozer 160 ready

 I redesigned the dozer 190 to a smaller dozer 160. This 160 class multirotor can only be equiped with 3 inch props and is compatible with 1306 and 1104 motors. It is not exactly the same quad as the dozer 230 or 190. This time the frame is has a real X shape. It also has the clean and dirty sections, but it made from vibration absorption soft silicone
 Currently this build is equiped with gemfan 3030 props. They are easy to find, cheap and deliver the beste performance/efficiency in combination with my roboterking 1306-4200kv motors and a 3cell lipo. These 1306-4200kv are really hard to find. Most 1306 motors are 3100kv. 4000kv become more and more available. But these 4200kv are really hard to find.
some specs:
 - size 160 class
 - AUW 330 grams
- motors Roboterking brushless 1306 4200kv
- prop gemfan 3030 
- esc DYS XM20A 
- battery Turnigy A-SPEC 3 Cell 850mAh 45c
- 700 TVL fpv cam wide angle lens
- FT951 25mw VTX
- Orange RX 6ch receiver
- Illuminati32 flight controller (cleanflight)

All dxf design files (frame) can be found here
Flight time for tis fpv race quad is limited to 3min. The goal was to keep the AUW less then 300 grams. But with my current 700tvl board cam this is almost impossible. Performance is good. I still got a 3on1 thrust to weight ratio.


Sunday, May 15, 2016

Dozer 190 ready

I redesigned the dozer 230 to a smaller dozer 190. This sub 200 class multirotor can only be equiped with 4 inch props, but is compatible with 1806 motors. It is exactly the same quad as the dozer 230. It has the clean and dirty sections.

Currently this build is equiped with these 4045 bullnose props. They are very strong and cheap. Best fit to maximize performance are HQprop 4040 tri blade props. But these props are expensive and break much easier on impact (crash).

some specs:
 - size 190 class
 - AUW 430 grams
- motors DYS brushless 1806 2300kv
- prop gemfan 4045 bullnose or 4040 tri blade
- esc HK blueseries 12A
- battery Turnigy Nano-Tech 3 Cell 1000mAh 45c
- 700 TVL fpv cam wide angle lens
- FT951 25mw VTX
- Orange RX 6ch receiver
- Naze32 flight controller
All dxf design files (frame) can be found here

Tuesday, April 05, 2016

Dozer 230 finalizing


The dozer 230 is ready. Compared to my dozer 260 (see blog below) this frame is much lighter. Total AUW for the dozer 230 with a 3 cell 1000mah is 450. That is 150 less then the dozer 260 and I still have the same flight time. Equiped with the gemfan 5030 props this build has a 3,2 on 1 thrust to weight ratio. I future I'll 5040 tri blade props. This will provide me a 4 on 1 thrust to weight ratio.
 The dozer 230 is build the same way as  the dozer 260. (see blog below) Difference is size and the bottomplate is complete carbon or glassfiber. This means that this frame also has a clean and dirty setcion. The center plate (clean section) is isolated from the rest of the frame by rubbers. This centerplate holds the flightcontroller, fpv cam and RC receiver.


some specs:
 - size 230 class
 - AUW 450 grams
- motors DYS brushless 1806 2300kv
- prop gemfan 5030
- esc HK blueseries 12A
- battery Turnigy Nano-Tech 3 Cell 1000mAh 45c
- 700 TVL fpv cam 150° wide angle lens
- ImmersionRC 25mw VTX
- Orange RX 6ch receiver
- HK NanoWii flight controller



All dxf design files (frame) can be found here





Saturday, March 19, 2016

Dozer 230 first steps

I have designed a new smaller (230mm) frame that is still compatible with 5 inch props. Less weight. But I can't use my multiwii 328p flightcontroller. This new multirotor frame is only compatible with 36mm flightcontrollers. I'll use a NanoWii FC on thuis build. Currently this quadcopter frame is CNC cut from 3mm thick G10 glass fiber material. Weight of bottom plate equales 78 grams.

I designed this frame myself you can download dxf file here: Dozer 230 bottom plate
Motor mount holes are compatible with most 18xx brushless motors (12mm - 16mm)




Dys 1806 motors, Hobbyking Bleuseries 12 ESC. 36mm basic power distribution board fixed to frame with some double sided tape.