Bottom plate

The bottom plate is a 1.5mm thick carbon fiber sheet. A 1mm sheet is not stiff enough and a 2mm sheet will make the quad to heavy.

Outer dimensions 200mm x 54mm
8 x 3mm holes
6 x 7mm holes

As I only have basic handtools to cut the sheet and drill the holes. I drilled the 3mm holes with a 3.5mm drill this way I have some tolarnce when I mount all other parts on it.






These 3D sketches are available on my 3D warehouse sketchup webpage . Select the Dozer 260 FPV race quad copter collection to get al sketches for this project.