FPV cam case

I'm using this sony 700TVL CCD board camera . This camera has no case and needs someting like a case in order to be mounted in the quad copter. Therefore I designed a very basic open case that holds the fpv cam. 3D printed with ABS or PLA it will weigh about 5 grams.

This case is designed for the 32mm board cam standard. Most 32mm board cams should fit in this case. 38mm board cams will not fit in this case nor in the frame.

I glued this case to the clean section plate with epoxy. You can use the 2 holes at the bottem to screw it to the plate with two 6mm M3 screws. But then you will have to drill two more holes in the clean section plate (these are currently not present on the current design)



These 3D sketches are available on my 3D warehouse sketchup webpage . Select the Dozer 260 FPV race quad copter collection to get al sketches for this project.